-
Transition edging finishes off the look of your tent floor and provides a safe transition from the ground level below
- EverBlock transition edge pieces snap onto the ends of flooring sections, providing a finished look and a gradual transition from below. When properly instaled, EverBlock meets ADA requirements and may be used to provide accessibility over varying ground surfaces. Edging is available in male,female and corner versions.
Marquee, Tent and Event Floors
Marquee, Tent and Event Floors
MODULAR INTERLOCKING FLOORING FOR MARQUEES, TENTS AND OUTDOOR STRUCTURES
Marquee Flooring / Event Tent Flooring
SUITABLE PRODUCTS: EVERBASE 3-DT, EVERBASE 3-ST, EVERBASE 2-DT, EVERBASE 2-ST, EVERBASE-DT, EVERBASE-ST, EVERDANCE


EverBlock Tent Flooring and Event Flooring System (EBF2 & EBF3) is ideal for corporate, industrial, military and event needs. Each modular flooring system features integrated cable channels and bi-directional structural reinforcement cross-ribs for added strength and durability. EverBase 2 (EBF2 & EBF3) event flooring is an 18" x 24" module flooring tile that transports in 3ft x 4ft pre-assembled sheets.
Everbase 3 wins with a quicker more rapid deployment when laying th etiles down (we suggest in preprepared 4's) as it is a simple 'foot stamp action' to connect.
The Everbase 2 wins where the asthetic look is the most important thing as it doesn't show any connection mechanisms and only shows the 1mm gap between tiles. However, it is a slower sconstruction tme as it requires a 45 degree angle heel kick to connect ( again we suggest stroring in sets of 4 panels for quicker deployment)
Before
After

Versitility with grass protection and an efficient drainage system
This versatility allows for previously unimaginable combinations - inlaid dance floors, raised floors for runways and staging, all are able to do with the flooring tiles over grass and stadiums, also integrated with walls and perhaps more..... No other system provides such ease of use, combined with the incredible versatility and genuis of EverBlock Flooring.
EVERBLOCK TENT FLOORS WORK WITH OUR EVERBLOCK BUILDING BLOCKS
All EverBlock Flooring works with our standard building block system, allowing you to create walls and dividers, event décor and event furniture. EverBlock and EverBlock Flooring together function as a complete event decor building system for all types of tent and event uses and may be reconfigured each time, depending on the needs of the specific event.

ALL EVERBLOCK FLOORING TILES ARE 100% WEATHER AND WATER RESISTANT

EVERBLOCK FLOORING IS DURABLE AND LONG LASTING
Every EverBlock Flooring version is manufactured in a high-impact Polypropylene co-polymer that contains UV inhibitors for outdoor protection in direct sunlight and is chemical resistant and easy to clean. All of our flooring is completely waterproof, including wood finish dance and event floors. Our modular flooring systems can support tremendous weights and can handle the traffic of large scale events and gatherings.
THE FLOORING TILES ARE MADE TO WITHSTAND ALMOST ANYTHING
EverBlock flooring is water proof, allowing it to be use in humid, wet, and damp areas such as basements, in the rain, and more. The wood finish on EverDance will not warp, rot, crack, or delaminate due to exposure to water.
-
Rapidly install and remove tent flooring for a quick site turn around
- EverBase2 transports in 3ft x 4ft panels, allowing for rapid installation by a minimal crew. A 20 x 20 tent floor can be installed by 2 people in about 15 minutes and then snapped into place with a simple step. To remove sections,simply lift EverBase up at an angle, disengaging the tent floor panels for transport and further use
-
Raise flooring on blocks to create elevated floors, spaces and stages
- EverBlock floors are designed to nest securely on top of EverBlock building blocks, allowing you to create multi-level risers, stages, podiums and raised floor areas for a variety of applications. We offer standard floor elevation packages and can help your design your own raised tent floor or stage at various sizes, shapes and heights and in various colours.
-
Work around obstacles and follow unique site plans
- Remove and stagger the modular EverBase2 and EverDance flooring sections to fit around tent poles, or to accommodate unique site obstacles such as fences, landscaping features or immovable structures that may be in your way. EverBlock tent floors will follow the contour of undulating floors while still providing a uniform and solid surface for walking, dancing and more.
-
Alternate tile colours and stagger sections for a more elegant look at your event
- Use our floring tiles to create a black, white or multicoloured look for dance floors, general event floors or for more elegant affairs. Mix and match standard EverBlock colours to match corporate or event colours and themes as well as unique designs and patterns.
-
Run electrical cables underneath EverBlock Flooring as well as LED lights
- Run electrical and communication cables underneath all versions of the flooring tiles, for tent lighting, fresh exhibits and other in-tent needs using the integrated cable channels running throungh all of the tiles underneath.
Transition edging finishes off the look of your tent floor and provides a safe transition from the ground level below
EverBlock transition edge pieces snap onto the ends of flooring sections, providing a finished look and a gradual transition from below. When properly instaled, EverBlock meets ADA requirements and may be used to provide accessibility over varying ground surfaces. Edging is available in male,female and corner versions. purchase edging fro your floor hereRapidly install and remove tent flooring for a quick site turn around
EverBase2 transports in 3ft x 4ft panels, allowing for rapid installation by a minimal crew. A 20 x 20 tent floor can be installed by 2 people in about 15 minutes and then snapped into place with a simple step. To remove sections,simply lift EverBase up at an angle, disengaging the tent floor panels for transport and further useRaise flooring on blocks to create elevated floors, spaces and stages
EverBlock floors are designed to nest securely on top of EverBlock building blocks, allowing you to create multi-level risers, stages, podiums and raised floor areas for a variety of applications. We offer standard floor elevation packages and can help your design your own raised tent floor or stage at various sizes, shapes and heights and in various colours.Work around obstacles and follow unique site plans
Remove and stagger the modular EverBase2 and EverDance flooring sections to fit around tent poles, or to accommodate unique site obstacles such as fences, landscaping features or immovable structures that may be in your way. EverBlock tent floors will follow the contour of undulating floors while still providing a uniform and solid surface for walking, dancing and more.Alternate tile colours and stagger sections for a more elegant look at your event
Use our floring tiles to create a black, white or multicoloured look for dance floors, general event floors or for more elegant affairs. Mix and match standard EverBlock colours to match corporate or event colours and themes as well as unique designs and patterns.Run electrical cables underneath EverBlock Flooring as well as LED lights
Run electrical and communication cables underneath all versions of the flooring tiles, for tent lighting, fresh exhibits and other in-tent needs using the integrated cable channels running throungh all of the tiles underneath.
PREVENT DAMAGE TO GRASS AND GROUND SURFACES
Because of EverBase’s unique, structural cross-ribbing system, it will distribute weight effectively and protect natural and synthetic grass from damage as a result of foot traffic and the weight of event equipment such as bars, furniture, golf carts and Gators.
EverBase tent floors will protect your clients valuable lawns, parks, sports fields, and grounds against wear and tear and prevent damage from pedestrians, golf carts, and rolling equipment.
QUICK AND SIMPLE INSTALLATION
EVERBLOCK STYLES USED FOR TENT FLOORING:
EverBase 1 - Solid or drainage version
EverBase 2 - Solid or drainage version
(both great for covering grass and multiple floor materials)
Feel free to buy or hire/rent our flooring anytime you have a big event coming up
WE'RE HERE TO HELP!
EVERBLOCK FLOORING IS GREAT IN TENTS OR SPECIAL EVENTS

MARQUEE FLOORING FOR EVENTS AND INDUSTRIAL NEEDS
EverBlock’s EverBase tent flooring is ideal for corporate, residential, and industrial marquees, tents and shelters. Our modular flooring sections transport efficiently on pallets and deploy quickly without tools or material handling equipment.
Unlike other interlocking flooring systems, EverBase marquee flooring is a SYSTEM, meaning it integrates with other versions of EverBlock flooring as well as with EverBlock building blocks.
Additionally, EverBase tiles offer a finished floor look, meaning you don't have to cover the floor with carpet to hide an industrial look. Our connectors are hidden from view, meaning that all you see is a crisp, clean, event-worthy look.

USE EVERBASE AND EVERDANCE FLOORING FOR MARQUEES, TENTS, GAZEBOS and SHELTERS NEARLY ANYWHERE
EverBlock flooring is durable and can handle typical ground variation and undulation common in backyards, parks and fairgrounds, and installs well over grass, gravel, sand, mud and asphalt.
Modules are completely chemical and water resistant and can be used in wet environments continuously. Once installed, EverBlock marquee tent floors lets water drain and flow underneath, providing a stable surface and keeping your guests dry and out of the water and mud.
With EverBlock you keep your attendees dry, safe, and elevated, while at the same time protecting the sub-surface from damage due to high-traffic.
Standard Marquee sizes and Flooring costs ( EverBase 3)
Size (metres) | Size (feet) | Type | Purchase* | 2 Week Hire^^ |
3.6m x 3.6m | 12’x12′ | Everbase 3 | £532 | £212 |
6m x 12m | 20’x40′ | Everbase 3 | £2,994 | £998 |
6m x 15m | 20’x50′ | Everbase 3 | £3659 | £1219 |
9m x 9m | 30’x30′ | Everbase 3 | £3,327 | £1,109 |
9m x 12m | 30’x40′ | Everbase 3 | £4,491 | £1,497 |
9m x 15m | 30’x50′ | Everbase 3 | £5,489 | £1,829 |
9m x 18m | 30’x60′ | Everbase 3 | £6,487 | £2,162 |
9m x 21m | 30’x70′ | Everbase 3 | £7,319 | £2,439 |
12m x 18m | 40’x60′ | Everbase 3 | £8,640 | £2,880 |
12m x 21m | 40’x70′ | Everbase 3 | £9,998 | £3,332 |
12m x 24m | 40’x80′ | Everbase 3 | £11,498 | £3,832 |
12m x 27m | 40’x90′ | Everbase 3 | £12,960 | £4,320 |
12m x 30m | 40’x100′ | Everbase 3 | £14,385 | £4,795 |
15m x 27m | 50’x90′ | Everbase 3 | £16,198 | £5,399 |
15m x 30m | 50’x100′ | Everbase 3 | £17,985 | £5,995 |
15m x 33m | 50’x110′ | Everbase 3 | £19,795 | £6,598 |
15m x 36m | 50’x120′ | Everbase 3 | £21,598 | £7,195 |
15m x 39m | 50’x130′ | Everbase 3 | £23,395 | £7,799 |
* PURCHASE PRICE Excludes Ramp Edging Expansion Joints, VAT and Delivery Costs
^^ HIRE PRICE Excludes Ramp Edging Expansion Joints, refundable deposit, VAT, Delivery Costs or Collection Costs